Posted By: 3wracing
hole size under 65 hemi scoop ? - 02/24/10 01:32 AM
does anyone know what the size and location of the holes under a hemi scoop (reproduction aar) should be
thanks Gene
thanks Gene
hole size under 65 hemi scoop ?
Posted By: hemiheadNC
Re: hole size under 65 hemi scoop ? - 02/24/10 02:38 AM
..if Marshall Bell still lives in NE PA, he has his ORIGINAL A990 65 Dodge "TinkerBell"...every see that one ??? Last I saw it was at the Albion show maybe 15-16 years ago....a complete time capsule...Check it out...
Posted By: GomangoCuda
Re: hole size under 65 hemi scoop ? - 02/24/10 02:10 PM
I bet you can get the answer in the Race Forum.
Posted By: curbman68
Re: hole size under 65 hemi scoop ? - 02/24/10 02:45 PM
It's an odd size oval hole that is offset to one side of the hood. To accurately reproduce the factory hole, you would really need a template made off an original hood. There is a guy on Ebay that sells a template for this, he goes by "HemiEddie". I have not used his template, but since he has an original car, I would assume what he is selling is correct.
Posted By: 3wracing
Re: hole size under 65 hemi scoop ? - 02/25/10 09:51 PM
thanks guys
Posted By: Anonymous
Re: hole size under 65 hemi scoop ? - 02/25/10 10:16 PM
heres a picture of my a990 coronet for reference.
Posted By: Anonymous
Re: hole size under 65 hemi scoop ? - 02/25/10 10:18 PM
one more.
Posted By: curbman68
Re: hole size under 65 hemi scoop ? - 02/26/10 12:25 AM
Quote:
heres a picture of my a990 coronet for reference.
Is that a fiberglass scoop you have on there?
Posted By: 3wracing
Re: hole size under 65 hemi scoop ? - 02/28/10 03:30 PM
Where in northeast pa did marshall Bell live ? That would be a nice car to have show up at this years pocono drag lodge reunion?
thanks Gene
thanks Gene