Fiberglass hood scoop repair

I have a repo. '72 A-body dual snorkel hood scoop that has split apart at the bottom front. What is the best way to re-attach it? It is a clean brake and the piece fits back together nicely. What is the best way to repair it, and what are the best products to use on it? Thanks for the help

check out this link,Its very helpful.If you need more that contact him directly.


https://board.moparts.org/ubbthreads/show...part=1&vc=1

Link doesn't work

This is what you want to use to bond fiberglass part together, it will bond much better than resin or kitty hair.

http://www.tooltopia.com/3m-automotive-8...=googlebase_18u

good stuff
WE use the Valvoline brand plyo-grip
same principle. I keep a tube handy its very versatile.

Quote:

---

good stuff
WE use the Valvoline brand plyo-grip
same principle. I keep a tube handy its very versatile.

---

3M owns Valvoline, look at the label where it was made.