EBODY SEAT BACKS - JUST A TEASER

Test fitted the new 71-72 seat backs today, they fit beautifully with every screw hole lining up perfectly. The 70 will also be done in the same tool with inserts for the sides. As you can see, the seat back doesn’t have any grain yet since it is extremely important that the tool is validated first before the grain is machined into the tool. You’re asking for trouble if you assume the part is good and machine the grain in before a good test fit.

This is just a sneak peek behind the scene look at the initial start of a part. The color is no more than what was in the machine when the tool was loaded for validation, could have been pink just as easy.

Michael C. Ross – Owner
B/E & A Restoration Parts, Inc.
www.beaparts.com
330-725-3990

What? You finished and textured those without test fitting them first? What's wrong with you man! .........

Oh, nevermind, you did test fit them.





*Super glad you are doing both the 70&71 versions! BTW, I'm sure you already knew it but many early 71 cars came with 70 style seats.

Mike,
Are these going to be the same thickness and be as rigid as the originals?

Quote:

---

Mike,
Are these going to be the same thickness and be as rigid as the originals?

---

They will be 1/2 as thick and be able to be twisted and pulled to fit any style seat.

I don't understand the question, are you asking me if we took liberties making the seat backs?

Ofcourse not.