70 challenger Front Valance Chrome Trim Hardware

I am looking for the hardware for the Front Valance chrome trim hardware for a 70 Challenger . Any pics? Thanks

This is the 71 hemi sunroof Challenger that Steve Juliano owns. It was restored by the previous owner. Tons of NOS stuff on this car. But not as correct as the 71 Cuda or 70 mod top Cuda Steve restored.

I had those pieces on my Challenger. I'm not 100% sure they were not removed prior though. And I got a set out of the junk yard (eons ago). Both of those has phillips screws like the ones pictured. But not sure how the screw head size compares.

I took this over two different visits. It take more than one time to take in the detail of the cars and stuff he has.

If your talking about the front valance trim like goes on the SE models. BEA sells them at $275. Yea expensive, I didnt buy when they first came out at $175 cause I thought that was a wee bit rich. But now I wish I had. I suppose limited run items that dont sell bigtime the mfg has to make alot to recoup original fabricating costs. I imagine one guy makes them and others sell them as far as suppliers go. If memory is correct, I read a topic where the ones made now are not even correct in appearance.

No, Im not looking for the trim , just the hardware. I do remember when they were 175.00 I looked for real ones for so long, I found them just before they started repoping them.

I'd say the hardware is six short chome plated phillips head sheet metal screws.

Looking at the pics above, they look like wheel lip mldg screws of the 69 and older type shown, anyone able to verify?

Or Chris, send me an address and I'll send you six of each for free if you'll be my guinea pig

PM sent to you Bill, Thanks