How many window trim holes in 69 B dutchman panel?

HELP! The shop that replaced the dutchman panel on my 69 RR did not drill any of the holes in it before they painted it. How many holes for the window trim clips are on this panel? I think theres 6, but I'd like to know for sure before I drill it.
Thanks,
Brent

I got 8 on my 68. I'd guess they're the same
Dan

here's a pic of 5 of the 8 if that helps. I could get some dimensions later if ya need them, dan

The pic really helps, I can use the speaker tray area for a reference. Between that and the "ghosts" left on the window trim I can probably guess how it should be. Although any other pics would be a plus!
Thanks again.

Here's a better pic and some measurements:
Measuring from the quarter/dutchman seam the first two holes are 2.1/4" and 6.1/4".
The two holes at the center of the panel are each 1 3/8" from center.
the remaining two holes are centered between the above two groups, but on mine one is dead center, and the other side is about 1 1/2" off center. (the one in the pic is off center)
Hope this helps.
Good luck, Dan