Posted By: sg333e
"Made in Canada" stamp? - 09/11/09 07:01 PM
Would like to hear where this stamp shows up on OEM cars, if anywhere? I've seen reference to it being more a function of an NOS part vs. assembly line.
If you have survivor examples, please post them up!
Posted By: MLR426
Re: "Made in Canada" stamp? - 09/11/09 07:27 PM
E-body Are you speaking of large stamp or small stamp ?
On the fresh oval air cleaner bases.
On the front bumper brackets for sure,rear bumper brackets ?
logan426
Posted By: gregsrt
Re: "Made in Canada" stamp? - 09/11/09 07:29 PM
I'll get a pic of one on a 69 b body 26" rad, and of a Made in Canada sticker on a 69 b body heater box.
Posted By: sg333e
Re: "Made in Canada" stamp? - 09/12/09 01:07 PM
Thanks Logan, and yes I was referring to my Cuda.
I have heard bumper brackets and bottom of shaker, just talked to bob at Glen Ray and he says radiator would only be stamped if it were dealer replacement.
Any others?
Posted By: MLR426
Re: "Made in Canada" stamp? - 09/14/09 01:14 PM
Shaker base plates as well
logan426
Posted By: Anonymous
Re: "Made in Canada" stamp? - 09/14/09 03:31 PM
Quote:
If you have survivor examples, please post them up!
Posted By: QuickBpBp
Re: "Made in Canada" stamp? - 09/14/09 10:44 PM
Here is an Nos Hemi Air cleaner lid....
Posted By: Anonymous
Re: "Made in Canada" stamp? - 09/15/09 12:22 AM
100% Original factory car that Steve Been and I documented and disassembled in 2004. The car was never wrecked.
Since we actually saw and documented this vehicle, we were quite certain that the overspray was the result of a sloppy valance repair attempted by the original owner, some 20+ years ago.
Posted By: 44D6PAKCUDA
Re: "Made in Canada" stamp? - 09/15/09 12:57 AM
On a side note..Welcome back Dave W.
Posted By: yellow sixpack
Re: "Made in Canada" stamp? - 09/15/09 11:57 AM
Hey Bob
Car looks great Joe showed me pics.
Rob
Posted By: Anonymous
Re: "Made in Canada" stamp? - 09/16/09 09:33 PM
Quote:
On a side note..Welcome back Dave W.
What a coincidence Jim! I just finished your keyring, saw your post and thought I would give you a sneak peek. These are no longer in the prototype stage. We have finally started manufacturing finished items. They are 16 gauge Stainless Steel with a miniature VIN applied on one side. The other side has a stamping of the original, (period correct) colored logo of the manufacturer. Pictured is your keyring along with a sample of a Dodge unit.
Thanks again Jim and I will talk to you soon.
DW
Posted By: Mike Mancini
Re: "Made in Canada" stamp? - 09/16/09 10:42 PM
this is on my must have list
Posted By: 44D6PAKCUDA
Re: "Made in Canada" stamp? - 09/17/09 12:48 AM
David-That is a sweet looking piece.Can't wait to hang some keys on it!! I didn't forget you on the valve caps either.I ordered up the ones I showed in the catalog last time we talked and they sent me some "over seas" replacements.I had them reorder them directly from the original manufacture.I'll let you know when they show.I also have to talk to you on some glass for mine and a buddies Challenger.Once again great to have you back.We all benefit from your knowledge.Thanks again!! Jim
Posted By: rayztoy
Re: "Made in Canada" stamp? - 09/17/09 12:00 PM
Very nice Dave! Should we expect anything less?!
Nice to have you back!
Posted By: Day2Runner
Re: "Made in Canada" stamp? - 09/17/09 10:26 PM
70 4406 air cleaner lid
did shaker cars ever come with black lid
or where they all orange from factory
scott ?? snoppy ??
Posted By: Anonymous
Re: "Made in Canada" stamp? - 09/22/09 03:16 AM
Not yet, Chrysler just finalized their bankruptcy proceedings and is starting to re-initiate their licensees. We have quite a few new products that will be turned in for approval. This will be one of them. Thanks!