Posted By: Purestocker
cuda header panel question - 04/17/09 03:59 PM
71-74 cuda header panels, are they all the same?? thank you in advance
Posted By: cataclysm80
Re: cuda header panel question - 04/17/09 11:26 PM
no, They are Not all the same. There are 2 or more versions. I'd tell you more, but I haven't studied this as in depth as I would like yet. Perhaps I'll learn something here from other posters.
Tav
Posted By: AARCONV
Re: cuda header panel question - 04/20/09 01:30 AM
my guess would be that 72-74 is the same...71 might not be since they have the quad headlights...but u never know...
Posted By: N9671X2
Re: cuda header panel question - 04/20/09 03:29 AM
No expert, but I think the 71 is different in regards to the vertical piece in front of the radiator is not drilled for the horns like the 72s and newer. Also, I believe the 5 slots where the grill is attached to the bottom of the header panel are inverted between the 71s and later years.
Posted By: m46rat
Re: cuda header panel question - 04/20/09 02:09 PM
You are correct regarding the slots. The black plastic retainers slide into the header panel in the opposite direction for the 72-4 header panels than they do for the 1971 header. You absolutely cannot use a 72-4 header panel for a 71 car, you will never be able to mount the grille because of the placement of the slots, they are shifted over from where they need to be to attach a 71 grille to it. The 72-4 panels have a bracket spot welded to the "arm" of the header panel. That bracket holds the dual horns for 72-4 cars. The horns on a 71 are mounted behind the washer bottle. That is the easiest way to tell if you have a 72-4 panel or a 71 panel, look for the bracket for the horns on the arm of the panel.
Posted By: elitecustombody
Re: cuda header panel question - 04/20/09 09:46 PM
70 is year on it's own just like 71,but 72-74 is the same, so there were 3 different versions on the E-body header panels
Posted By: Purestocker
Re: cuda header panel question - 04/22/09 12:11 AM
so is the grille/horn bracket bolted on in 71 and spot welded from 72-74??
Posted By: cataclysm80
Re: cuda header panel question - 04/22/09 04:03 AM
In 71 the horns go on the inner fender, not on the header panel.
Tav