Moparts

Help with part# for B body rubber firewall hole plug

Posted By: 71TA

Help with part# for B body rubber firewall hole plug - 08/03/22 04:20 AM

I "think" the part# is 2571069 but the numbers on the one original part I had were very worn.



Attached picture B_HTR_BOX_STUD_PLUG_01_2000__75839.jpg
Posted By: gtx6970

Re: Help with part# for B body rubber firewall hole plug - 08/04/22 03:24 AM

I use to have one of those No idea if I still have it or not
best I remember its 71 and up ????
Posted By: 6PakBee

Re: Help with part# for B body rubber firewall hole plug - 08/05/22 12:57 PM

What years does this plug fit?
Posted By: 6PakBee

Re: Help with part# for B body rubber firewall hole plug - 08/05/22 12:58 PM

What years does that fit?
Posted By: John_Kunkel

Re: Help with part# for B body rubber firewall hole plug - 08/05/22 04:21 PM

The number suggests it was first produced for '64 models but might still be used many years after that.
Posted By: 71TA

Re: Help with part# for B body rubber firewall hole plug - 08/05/22 08:55 PM

Heres a discussion on Dodge Charger about these plugs. I THOUGHT they were used to fill the non AC heater box stud holes when an AC heater box was used.

http://www.dodgecharger.com/forum/index.php?topic=110012.0
Posted By: fastmark

Re: Help with part# for B body rubber firewall hole plug - 08/06/22 11:14 AM

That’s what they are for. I’ve got a couple of ac b bodies at the shop. I’ll see what I can did up for you this morning at the shop.
Posted By: 71TA

Re: Help with part# for B body rubber firewall hole plug - 08/09/22 06:25 PM

Thanks Mark
Posted By: fastmark

Re: Help with part# for B body rubber firewall hole plug - 08/15/22 01:36 PM

Ok, I found a good one with a clear number still on it. Sorry for the delay, Jim. Yes, you have the correct part number on your first post.

Attached picture FEBDE54C-1415-4EC2-BC7F-FB1E87E986FA.jpeg
Posted By: gtx6970

Re: Help with part# for B body rubber firewall hole plug - 08/15/22 07:12 PM

I looked at my 67 over the weekend and it has a few of them it IS a factory air car .

BUT, they are NOT used to fill firewall holes for non air cars . Much to small for that and they not in the locations a non air box would mount


I will double ck this evening and see how many there are on it and locations and see if its also in both my 66's which are non air cars
Posted By: 71TA

Re: Help with part# for B body rubber firewall hole plug - 08/16/22 12:39 AM

Thanks guys!

I was unsure of the part number because I can't find it in any of my parts manuals.
© 2022 Moparts Forums