Moparts

71 cuda side glass restoration

Posted By: RROD

71 cuda side glass restoration - 07/29/22 05:43 PM

Need the shouldered bolt which attaches the front stabilizer guides to the front of the glass of a 71 cuda. . The guides slide up and down on the front vertical glass stabilizer. The bolt goes through the glass, a plastic round retainer and the plastic stabilizer guide. Need 8 of these bolts (4 per car). Was told they are not reproduced. If not reproduced then is there a substitute? The bolt main shank fits through the hole of the guide. The threaded portion of the bolt is shanked down to screw into the retainer.
Posted By: DAYCLONA

Re: 71 cuda side glass restoration - 07/30/22 02:33 PM

Detroit Muscle Technologies (DMT) offer the 70-72 E body kit.....
© 2024 Moparts Forums