Posted By: 70sixpkrt
hood Insulation Pad - 02/28/21 09:59 PM
Is this the correct way a hood insulation pad go? Or is it backwards? For a 70 Charger R/T. I bought this one about 30 yrs ago from Yearone.
Posted By: topside
Re: hood Insulation Pad - 03/01/21 12:54 AM
The visible side should be flat, not puffy, with visible contours that mimic the hood underside.
They weren't particularly thick, nor puffy.
For a long time, the aftermarket ones were incorrect.
Posted By: 1972CudaV21
Re: hood Insulation Pad - 03/01/21 05:18 AM
What company is making “correct” pads?
Posted By: 69bfan
Re: hood Insulation Pad - 03/01/21 02:34 PM
The correct molded style is either a product from REM or Repops. REM only sells through it network of vendors which is quite large and Repops sells both retail and wholesale.
Posted By: 1972CudaV21
Re: hood Insulation Pad - 03/01/21 06:39 PM
The correct molded style is either a product from REM or Repops. REM only sells through it network of vendors which is quite large and Repops sells both retail and wholesale.
Thank you. I looked them up and found their websites. What about
https://www.detroitmuscletechnologies.com/..?