Posted By: 11secaarcuda
Restoring leaf springs on AAR - 12/21/20 01:52 AM
Looking for factory Mopar part numbers for the following parts for my leaf springs:
The locating pin and nut (this holds the spring pack together)
Zinc liners between the springs (there are 2 sizes)
Plastic liners
Any help is appreciated.
Thanks.
Posted By: 4406bbl
Re: Restoring leaf springs on AAR - 12/21/20 04:12 AM
Frank Badalson has a nice kit. The center bolt and nut are a little different so save your originals, even in the 70s and 80s when you ordered original bolts they were not quite the same, and the nut was shorter, just a generic part at least when I ordered some. Frank's kits have the correct zinc liners
Posted By: HEMICUDA
Re: Restoring leaf springs on AAR - 12/21/20 08:39 AM
Frank Badalson has a nice kit. The center bolt and nut are a little different so save your originals, even in the 70s and 80s when you ordered original bolts they were not quite the same, and the nut was shorter, just a generic part at least when I ordered some. Frank's kits have the correct zinc liners
Frank 804-275-2155 sixpackfrank@aol.com