Moparts

Ebody 1970 resonator

Posted By: Sammy

Ebody 1970 resonator - 10/04/20 12:48 AM

Is the arrow on the resonator really suppose to be facing forward?
Posted By: gtx6970

Re: Ebody 1970 resonator - 10/04/20 03:05 PM

arrow is for direction of flow
Posted By: Sammy

Re: Ebody 1970 resonator - 10/04/20 03:25 PM

Originally Posted by gtx6970
arrow is for direction of flow


Thats what I thought but the car i just acquired has the arrows facing forward and looked at pictures on the net and they are showing arrows pointing forward as well.
I'm confused.
Posted By: Sammy

Re: Ebody 1970 resonator - 10/04/20 03:38 PM

Is there going to be a problem since the arrows are facing forward now.
I dint think ill be able to reverse them since I cinched the clamps down tight yesterday.
Don't want to ruin the new resonators and over the axle pipe now.
Haven't installed the passenger side yet.
Posted By: Little Detroit

Re: Ebody 1970 resonator - 10/04/20 04:33 PM

[

all yuou have to do is remove clamp heat the cinched area red hot ,move the resonater gentely around while still red hot and should strechout the cinched area to remove,repeat if necessary , i woud use NAP gas torch intead of torches.
Posted By: Sammy

Re: Ebody 1970 resonator - 10/04/20 06:46 PM

Well,I looked at the old muffler again and the arrow points to front because it says INLET on it.
Unless I'm missing something here.
© 2024 Moparts Forums