Posted By: 71pettyblue
Wheel bearing dust caps - 07/02/20 02:41 AM
Putting a '67 Coronet RT together for a friend, anyone have a source for new dust caps? I don't need NOS, reproductions are good enough.
Thanks,
Posted By: Neil
Re: Wheel bearing dust caps - 07/02/20 02:29 PM
NAPA or whomever sells Dorman ones maybe.
Posted By: burdar
Re: Wheel bearing dust caps - 07/02/20 03:06 PM
https://forum.e-bodies.org/wheels-t...s-cheap-tool-for-dentless-install/16945/These dust caps were discussed recently on E-bodies.org. There are part #s in the link but double check that your friends 67 takes the same ones. The new caps have a tall lip. Taller then original ones. You might have clearance issues with the wheel center cap if you don't trim the caps to sit more flush to the hubs.
Posted By: pushbutton
Re: Wheel bearing dust caps - 07/02/20 03:45 PM
Putting a '67 Coronet RT together for a friend, anyone have a source for new dust caps? I don't need NOS, reproductions are good enough.
Thanks,
Joe Suchy did at one time have some.
joesuchy@64gmail.com
Posted By: bremotorsports
Re: Wheel bearing dust caps - 07/02/20 03:48 PM
I always have them in stock!
Bill Rolik
bremotorsports@verizon.net
201-394-5533 Cellular
www.billrolikenterprises.comHit the green search button and type 1613416-P !!!
Posted By: Mastershake340
Re: Wheel bearing dust caps - 07/02/20 03:49 PM
When I was restoring my T/A I really wanted to find new dust caps, and the ones I found and purchased didn’t fit!
I finally gave up and reused my dinged up old ones.
The new ones all had made in China stamped in them. Which we’d carefully polished off before installing, I should have waited until I’d tried them to see if they’d fit before wasting the time polishing.
Posted By: John_Kunkel
Re: Wheel bearing dust caps - 07/02/20 05:41 PM
For drum brakes NAPA NOE 7302437
Posted By: fal3
Re: Wheel bearing dust caps - 07/02/20 08:10 PM
Dorman 13996; ordered from Rock Auto, Dr. Diff
Posted By: 71pettyblue
Re: Wheel bearing dust caps - 07/03/20 04:19 AM
Guys, thanks for the responses. I'm also working on my friend's 56 Fury, the caps are also beat up and they fit the RT. That size must have been used by Mopar for many years.
Posted By: gtx6970
Re: Wheel bearing dust caps - 07/03/20 04:40 AM
Last i ckd they were still avail thru Mopar.
been a few years since Ive ckd though.
Posted By: DoctorDiff
Re: Wheel bearing dust caps - 07/03/20 05:05 AM
The cap bore size of aftermarket rotors is inconsistent.
Dorman # 13996 caps fit the OEM Mopar bore spec.
Dorman # 618-101 caps fit the smaller bore variants.