Carburetor mounting

What is the correct mounting hardware for a 74 small block four barrel and a 71 big block four barrel, bolts or studs?

if you want OEM correct fasteners littledetroitrestorations.com the absolute largest selection of All OEM Correct made in the USA fasteners.

Thank You I have seen both bolts and studs and not sure which was correct, maybe both are! What ever was available when engine was being assembled.

studs on 4 bbl application , bolts on multi carb applications

Thank You!!

That isn't true at all!

Your saying all 4bbl. applications???

Ron

I was think 1971 V8 4 bbl applications were bolts. ?

I know for sure some 318 2barrel applications were 2 studs/nuts and 2 bolts

you guys should really pay attention to the question asked ,instead of trying to stir things up. that's exactly why this site is losing patrons

Here's the part of question asked above. Your answer was studs: for 71 big block four barrel.
How is that correct?????
How am I stirring things up?
Ron

Almost certain '67 ~ '71. Not sure about '72, only had one for a very short time.

It's bolts on bigblocks right up to 72, never really cared to investigate later cars.
Ron

I really hate the taste of crow .. I was wrong .. doesn't matter why imis spoke no excuse for it . correct is bolts up to 74 .

No biggie Little Detroit, we've all had that taste once or twice.....LOL

Joe

Great so it’s bolts on big blocks but how about the small block?

Now I'm out on a limb, but I think 4bbls are bolts, 2bbls are studs, again limited to years you listed earlier. Kinda anxious to see what the small block guys say.

Everybody slow down and read the questions before answering. I’ve read the answers and some are wrong.

Have to tell you that 1967 BB mopars With 4bbl are studs and nuts. Owned multi-dozens of these cars.

Friend bought a 67 GTX new and still owns it, very original car That is a great reference. Studs and nuts.

I know 1970 and 1971 are bolts only

I feel they changed to bolts in 1970 when the chokes and intakes changed and they started using the think carburetor base gaskets.

Same intake Manifold 1967-1969. Same hardware?

1968 model year 440 intake with carburetor studs and bolts;