Posted By: OhioMopar
Floor pan replacement. - 03/08/20 09:00 PM
I am about to repair or replace the floor pan in my Super Bee. I have a couple choices. 1)patch the existing pan with metal from a parts car with good sections that I need. 2)replace with AMD floor pan. 3)pull floor pan from parts car and patch the holes in it and install in my car. I realize a ton of work either way. But let me get to the question...
If replacing the whole pan, would the car (hardtop, no sub frame issues.) need to be braced in some way? Will removing the whole pan cause any structural issues putting it back in?
I also had the thought of welding the US Cartool frame connectors to the subframes before removing the pan if I go that route. Thoughts?
Thanks.
Next to gas pedal and console
Next to front mount on seat track.
Obviously the drain hole.
Next to wire track.
If replacing the whole pan, would the car (hardtop, no sub frame issues.) need to be braced in some way? Will removing the whole pan cause any structural issues putting it back in?
I also had the thought of welding the US Cartool frame connectors to the subframes before removing the pan if I go that route. Thoughts?
Thanks.
Next to gas pedal and console
Next to front mount on seat track.
Obviously the drain hole.
Next to wire track.