E Body Cuda Hood Release Lever Spring

Posted By: Droop69

E Body Cuda Hood Release Lever Spring - 01/23/20 03:55 PM

I am currently working with Stephan (ACR2000) on restoring a couple of Cuda hood release levers 71-74. My springs are broken on both of my levers, and was wondering if anyone has a source for replacement springs?

Has anyone found a vendor that carries the release spring? I am not sure if the Challenger and the Cuda used the same spring.

Thanks!

Attached picture IMG_9847.jpg

Posted By: Droop69

Re: E Body Cuda Hood Release Lever Spring - 01/23/20 04:23 PM

A better pic of the spring by itself. It is the lower right one.

Attached picture e body spring.png

Posted By: hulmule

Re: E Body Cuda Hood Release Lever Spring - 01/25/20 02:12 AM

I'm in the same dilemma. Son's cuda has the same problem. Did a little looking but didn't see anything yet. Please let me know if you find something par12730@sbcglobal.net . I will keep looking and if I find someone I will let you know

Posted By: Droop69

Re: E Body Cuda Hood Release Lever Spring - 01/26/20 07:53 PM

Yes, we are striking out so far. I might have to find several releases to make one that will work!