Rubber stamps

Can't find my # stamps (the type you see on Mopar rearend housings).
Who sells them?
I seem to recall the OEM #s were about 1.25" tall, but I don't recall the font name.
The ones I'm seeing on the web say 1" x 1", but $7.95 each and I need at least 4...
(That's rubberstamps.net off the e-bodies.org site)

Thanks in advance!

sylvainmopar.com

Saw a link to that website elsewhere, and just tried it again, nothing listed except a license bracket.
Can't contact through the site.
Guess I'll try locally @ Staples and see if anyone there can figure it out from a sample photo.

http://board.moparts.org/ubbthreads...=7872418&an=0&page=0#Post7872418

http://board.moparts.org/ubbthreads...8&an=0&page=0&gonew=1#UNREAD

https://www.google.com/search?q=8-3/4+rear+end+paint+marks&rlz=1C1VFKB_enUS656__656&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwju1-i1q6rOAhVJlx4KHf2SAc4QsAQIHQ&biw=1280&bih=923#tbm=isch&q=8-3%2F4+a-body+rear+end+paint+daubs

https://www.e-bodies.org/resources/mopar-stamps-stencils-paint-ink-part-numbers/

I bought a stencil kit at a craft store, Michael’s I think here...did my own came out pretty good I think for a budget build...

I had a local stamp place make a stamp for my heater box. It's an old typewriter style font, which was a real pain to match up.

Well, no luck with anyone local, they just do office stuff.
The e-bodies.org site re-directs to a stamp site.
Trying to order them through the stamp site is a nightmare - and they don't show the font that e-bodies.org shows.
Left a message for them to see if someone there knows about them.
This is shaping up to be a test of my OCD...

Ive had a bunch made at Rubberstamp.com

with excellant results

Heard back, and it's a deal where you send them the artwork; they don't keep a library of them.
I foolishly thought I could just call or email in an order for what I wanted.
It'll have to wait for when I have a couple hours to deal with it, I guess.

What Numbers are you looking for ? I have several left over stamps from my rear Axle for my 71 Cuda I would be willing to send you if their the correct ones you need, their also the correct font.

That would be really cool, and I'd clean & return them and reimburse your shipping.
I need a 2, a 4 and a 1.
I assume (though I could be wrong) that individual # stamps were used rather than have a stock of 3-digit codes & dates.

Well I’m not much help then my axle code is 019

Nevertheless, I appreciate the offer, thank you.

You can try this

https://www.e-bodies.org/resources/mopar-stamps-stencils-paint-ink-part-numbers/