10 x 21/2 brake drums

Does anyone know where one may obtain 10 x 2/12 brake drums? I guess I should be a bit clearer, drums that are not stamped “ China” if anyone can furnish any help it would be appreciated! Thanks

I guess the no reply’s might answer my question!! LOL I have spent a bit of time looking and can find nothing, I suppose it is not a big deal, just something stamped China on a 48 year old muscle car just doesn’t seem right. Anyhow should someone come up with anything let me know and Thanks!

Maybe you can find someone with old stock. A few years back I bought mopar nos ones off ebay. Maybe if not nos, then look for old stock bendix or something like that.
Here is a example. https://www.ebay.com/itm/Mopar-10-X-2-1-2-Heavy-Duty-Finned-Brake-Drums/292855043932

You may have to put in some search time but you probably can find some out there. It isn`t easy though.

Tried Rockauto?

Yes I tried Rock they have China and have been looking on eBay. I’m good with new old stock Bendix or raybestos if they can be located. Thank you both for trying to help. The Search goes on!!

Although I was not looking for HD drums they are an option. I see no reason why they would not work. Thank You

Strangely the best auto parts store I've had the best luck with finding Mopar brake drums and parts is Federated Auto Parts. Don't know why but they always had what I was looking for and always Made in USA (or Canada) If you have a local Federated Auto Parts give them a call..........or not

http://www.federatedautoparts.com/

Mike

I found these at Federated and never thought anyone still riveted brake linings on..................and on Chrysler Pentastar shoe cores and by Bendix

I have a set of new drums, that I’ve had for years - let me check and see if there’s a manu. Country listed on them.

I have a pair and the tapered ring around the axle opening sticks out far enough that the stock steel wheels don't contact the drum surface. Basically the wheels can't be tightened down all the way. These are from NAPA and ;I'm sure they are from China or wherever they make the best junk.

I have a complete front brake system, backing plates, all assembled with hoses. Took them off a drag car to install disc brakes.
Also have 4 drums, 2 are drilled for 5/8 studs and the front 2 are not attached to the hubs as they had 3 inch studs.
All are in good condition. Only about 50 miles or so. Bought them in 1996. Can't read where they were made, but
I think they are Raybestos. The shoes are riveted with gold anodizing, Bendix I think.
I loaded then into the truck last night, heading for the scrap yard. I you want these call me today and I will save them.
I'm headed to the Nats. can bring them there.
Call today or tomorrow morning going to scrap.
Doc Schwarz
734-341-0507