Posted By: oldjonny
Plug Wires - Looking for Suggestion - 07/01/19 05:49 PM
I have tried two different sets of "Custom" fit wires for my 1966 361. I have resigned myself to just having to make a set as the "Custom" ones all fit like garbage. So, whose wire sets are actually any good anymore? Nothing HP about the car, just want a set of wires that does not fit like junk.
Posted By: topside
Re: Plug Wires - Looking for Suggestion - 07/01/19 09:57 PM
Lots of guys here swear by the Firecore wire sets, and judging by their photos, they're spot on.
Budget/non-OEM would be whatever low-resistance cut-your-own sets from Summit, Jeg's, etc.
For that kind of thing I usually get Accel or Taylor.
Posted By: pushbutton
Re: Plug Wires - Looking for Suggestion - 07/01/19 10:10 PM
Firecores fit fine on my 69 RR with stock exh manifolds. Wires may route different on a 66 if they have end drop manifolds.
Posted By: tman
Re: Plug Wires - Looking for Suggestion - 07/01/19 11:40 PM
I like my Firecore set for stock 440-6. I got the stock looking version 7mm.
Posted By: gtx6970
Re: Plug Wires - Looking for Suggestion - 07/02/19 01:02 AM
I put a set of firecore wires on a stock 383 in a 1966 coronet. wasnt impressed. My opinion only btw
Best fitting wires Ive found yet for factory made appearance has been htps://www.lectriclimited.com/spark-plug-wire-sets
Posted By: mopars4ever
Re: Plug Wires - Looking for Suggestion - 07/02/19 01:17 PM
I have always used the cut to fit wires. Takes a little more time but I dislike messy looking plug wires.
Posted By: lewtot184
Re: Plug Wires - Looking for Suggestion - 07/02/19 06:11 PM
i buy the components separate and make my own. everything fits like it's supposed to and I don't jump thru a bunch of hoops with vendors.