70 440-6 idle solenoid wire and bracket?

Is the solenoid wire routing and bracket shown in this photo correct for 70 440-6?

If so, does anyone know a source for the bracket? I cannot find anywhere so far.

Thanks! Joe

Yes, that is the correct bracket. Very easy to make your own.

Frank Badalson should have it.

http://www.rogergibsonautorestoration.com/FileStream.aspx?FileID=1

Ron

Black solenoid wire and that style plastic keeper would be 71{?}...70 should have a blue solenoid wire...Here's the 70 style on mine...R/T specialties has the complete set-up...

1970 Solenoid was a DR1114429 (round brass head, single spade connector at base) 1971 was a DR1114443 and will have hex brass cap with a second spade connector

Thanks for the info.....I ordered the bracket from R/T Specialties!

As luck would have it the current issue of Mopar Action has a 70 RR 440-6 survivor article and it has a clear pic of the bracket..It appears the plastic wire clamp is natural{white} where the one in my pic shows it painted engine color..Just another detail I need to correct...

Would love to see this photo if someone can upload it.