Moparts

426 Hemi oil dip stick tube covering

Posted By: sbcjd

426 Hemi oil dip stick tube covering - 02/09/19 06:52 AM

Does anyone make an accurate reproduction of the 426 hemi oil dip stick tube covering? I recall the original was some sort of asbestos material as used on the positive battery cable.
Posted By: A12

Re: 426 Hemi oil dip stick tube covering - 02/09/19 09:52 AM

????

Not sure if this is what you're asking about or if the sell the covering separately?

http://www.hooverautoparts.com/products/Engine/M%20225.php

Attached picture thumbnail.jpg
Posted By: FC7cuda

Re: 426 Hemi oil dip stick tube covering - 02/09/19 03:35 PM

Moparts member xs29j8 has some NOS ones for sale, reach out to him.(Allen)
Posted By: mccannix

Re: 426 Hemi oil dip stick tube covering - 02/09/19 05:05 PM

I had hoped the reproduction sources would have stepped up and done a better looking sheath, but as of this past summer the only reproduction offered is seen in first picture on the top as compared to an easily distinguished original on bottom.
Sheath weave is completely different on reproduction as are ends,( original on bottom picture )

Attached picture xx3.jpg
Attached picture xx5.JPG
Posted By: sbcjd

Re: 426 Hemi oil dip stick tube covering - 02/09/19 06:22 PM

Yes, I will try to contact him. I am looking for an original. Thank you
Posted By: xs29j8

Re: 426 Hemi oil dip stick tube covering - 02/11/19 06:07 AM

Originally Posted By sbcjd
Yes, I will try to contact him. I am looking for an original. Thank you



Thank... for those interested, I am almost out of the Heat Shield Sleeve and only sell them with a tube and bracket (clip)… $195 for the 3 NOS items.
© 2024 Moparts Forums