Posted By: 440PURSUIT
71 Cuda Rocker Mouldings- Yes or NO - 03/06/18 04:16 PM
When did cars come with this trim?
I plan on doing a 71 Cuda Convertible clone and wonder if this mouldings is
A necessary addition or preference.
They seem to be for 71-2 and are rather pricey NOS
Thanks
Posted By: biggE
Re: 71 Cuda Rocker Mouldings- Yes or NO - 03/06/18 05:12 PM
The rocker trim was standard on all 71 cuda's
Posted By: Little Detroit
Re: 71 Cuda Rocker Mouldings- Yes or NO - 03/08/18 12:53 AM
if you want to get that rocker molding cheap go to your local chevy dealer and order a pair for a 69 Camaro. same exact molding was used on 69 dart , 69 Camaro and 71 cuda .
Posted By: hemicar1971
Re: 71 Cuda Rocker Mouldings- Yes or NO - 03/08/18 01:03 AM
Cloning a 1971 Cuda Convertible you will need the rocker trim, door and quarter window trim on top of the door and quarter, rear panel trim four pieces and all is coded on a CUDAs fender tag and broadcast sheet. Also the louvers for the fenders. You will have to weld in the proper studs or use the body repair studs for all trim.
Posted By: 440PURSUIT
Re: 71 Cuda Rocker Mouldings- Yes or NO - 03/09/18 08:30 PM
On the Camaro mouldings...
Wow, that’s good to know. A friend has NOS mopar and wants a lot for them