Posted By: gregok
Cuda air box diverter rubber gasket - 03/04/18 08:05 PM
Does anyone make or carry the rubber gasket that fits around the diverter flap in the driver side air box on a non a/c 1970 Cuda? Mine is not the best. 🤔
Posted By: gregok
Re: Cuda air box diverter rubber gasket - 03/04/18 11:39 PM
I will contact them, thanks.
Posted By: 71TA
Re: Cuda air box diverter rubber gasket - 03/06/18 04:44 AM
That rubber was "over molded" on the metal door. Basically the metal door was put in the mold and the rubber molded around it. To replace it the rubber would have to be removed and them molded onto the door again. So basically, there's no aftermarket replacement for these. I usually pick up a bunch of old beat up fresh air vents when I'm at the swaps and sell the good (or not so bad) doors out of them.
Posted By: gregok
Re: Cuda air box diverter rubber gasket - 03/06/18 05:06 PM
I talked to you yesterday about this, thanks for the info. Looking forward to the other stuff I ordered from you.