Posted By: 71cudaddict
68 charger - 01/25/18 08:10 PM
restoring a 68 charger can someone tell me the correct color white for the inside of the doors and maybe some pics of where to paint to. thanks Rickey
68 charger
Posted By: 6bblgt
Re: 68 charger - 01/25/18 09:08 PM
1968 "Upper Door Frame" paints used the same codes as exterior, for a C6W Charger interior, it is "W"
the parting line for the exterior to UDF paint is the door seal holes
the parting line for the exterior to UDF paint is the door seal holes
Posted By: rarefish
Re: 68 charger - 01/26/18 05:46 PM
Just digging through some of my pics that I have. Here is a shot of the front part of the door on my 68 Charger. As 6bblgt says the door seal holes is where your tape line would be.
I seen so many "high end" restoration shops get this wrong. They paint the entire door frame using the exterior color and boy does it look like crap when the doors are closed.
I seen so many "high end" restoration shops get this wrong. They paint the entire door frame using the exterior color and boy does it look like crap when the doors are closed.
Posted By: 469runner
Re: 68 charger - 01/26/18 08:31 PM
Yes, weatherstrip holes.
Posted By: 71cudaddict
Re: 68 charger - 01/26/18 11:24 PM
THANK YOU VERY MUCH