1969 b-body dash frame - which ones are EXTRA?

1969 Road Runner 4-speed dash frame has a couple EXTRA holes from under dash gauges - are all 8 of these added or are some of them original?

4 left of the steering column & 4 right of the ashtray

I don't have a car handy for comparison, but I'm under the impression that the factory holes are punched, or threaded using a doubler or insert plate. I do recall more holes than items on a stock dash, which were maybe used for fixtures. My guess is that if the holes have burrs from a drill, they're probably from installing aftermarket gauges, tape decks or CB units.

Here's a frame I have from a 69 Coronet. The first pic top left there are two added holes looks like from a single aftermarket gauge but all the other holes are factory. Hope this helps

Dan I thought for sure I had my dash photos on this computer but I was wrong. I will get them and post mine tomorrow to compare with the others posted. I will compare them also to my dad's RR to make sure. Sorry.
David

Here is the best example of an original one I have. It appears to have a extra hole or so. Driver side outside edge.

Next photo Right side of steering column.

Passenger side of dash. Not sure of the 4 holes in the center if they are supposed to be there or not. My guess is not.

THANKS ALL!
looks like 9-holes too many

Don't forget the 4-speed reverse indicator light and the rear speaker fader (but the second is a large hole).

the 4-speed "REVERSE" light hole is there

no rear seat speaker

it looks like there was a "pilot" hole for locating the "AIR GRABBER" cable, but was missed to the right by an inch