Posted By: hemiviper588
Are Correct MOPAR Logo Repro Fan Belts Available? - 11/07/16 01:12 AM
I have a 70 V code Challenger that needs a fan belt...are correct Mopar repros available? Thx
Posted By: johntpr
Re: Are Correct MOPAR Logo Repro Fan Belts Available? - 11/07/16 02:07 AM
http://www.gastanks.com/MOPAR-FAN-BELTS/departments/824/But..they are not very correct, and they stretch too much. Not many good choices out there.
Posted By: 71birdJ68
Re: Are Correct MOPAR Logo Repro Fan Belts Available? - 11/07/16 05:03 AM
From what everybody says, they will not stay on. To be used for show only.
Posted By: Big D A12
Re: Are Correct MOPAR Logo Repro Fan Belts Available? - 11/07/16 02:07 PM
From what everybody says, they will not stay on. To be used for show only.
This has been my experience as well. Run a Gates for driving, and repop for show.
D
Posted By: 340cpe
Re: Are Correct MOPAR Logo Repro Fan Belts Available? - 11/08/16 04:49 AM
I know I am about to start an attack on myself but I must tell the truth. Several years ago I got into a verbal battle with the rep. From Quanta at Carlisle regarding this same subject. I was told and read via the Internet about the problems with their belts. He insisted there were know problems. Well with really no other choice for a "factory" looking belt I tried a pair. A power steering, which I had an original and the Quanta belt was extremely close in appearance, and an alternator/fan belt. These were for a 71 383 charger. They have been on the car now for four years and I have never had one fly off or I have never had to tighten either one. Not saying they are all good this is just my experience.