Anybody have close up pics 71 RR rocker ends.

Trying to see if that hump i the bottom is supposed to be there or if it got bent up from being jacked wrong.

Any pics of the bare rocker would be great, and a close up of the end.

And if anyone has a close up with the rocker and wheel house mated or even after the quarters been mounted would help.

Is this what your looking for.

Wrong end of the rocker.

I need close ups of the back of the rocker. While the quarter panel and maybe the wheelhouse is removed

how about the whole rocker removed from a car?

Sweet, thats exactly what I needed.

I couldn't tell if that little hump at the back bottom was supposed to be there, or if maybe mine had gotten bent up by improper jacking at one point.

The side in my pics is the good side, the other side is missing a good 6 inches more and was gone down to the pinch weld so I couldn't use that side as a reference.




Started making a piece of rail from 14 gauge last night, now I get to make two rockers

i wish the rocker on my car looked like that
that is why i have that donor drilled out
and a nos outer one for the other side
that one was sitting on top of my to be blasted pile
with a bunch of other rusty junk
so it was easy to get some pics for you.