six pack carb base gaskets- where to get the good ones

I forgot to buy them so I got online and it seems nobody carries them anymore? I see Jegs sells the grey ones but I thought those were too thin?

Superformance gaskets are what you want. Mancini's and some others carry the line.

Base gaskets

Good luck!

I saw those on Mancini's site but wasn't sure if they were specific to the 6 barrel carbs. Any idea how thick they are? I've always used the MP paper gaskets

Another option (on pg 4)

Gibson restoration

Might check out Holley.

https://www.holley.com/products/gaskets/carburetor_gaskets/parts/108-9

Fel pro 1904

Thickness matters and whatever you use make sure the carb base is flat,90% have the corners pulled down from over tightening.

I thought this was the go to kit with the good base gaskets?

https://www.amazon.com/Genuine-Mopar-P4529060-Pack-Gasket/dp/B003TQBZOM

If your carbs and manifold are flat, the thicker gasket will have a better chance of leaking with time.

I believe some are under the impression a thick gasket is better, but in reality are compensating for another issue.

I've used the thin one Scott sends with rebuilds and have no issues

it is, nobody stocks them. says it will ship within 1 or 2 months?

They have been on back order since April.

I use the ones Promax sells.

I ended up getting the ones from Superformance. Wow! Great, friendly customer service, quick shipping, and a great looking thick gasket!