Posted By: Aar1064
70 E body wiper linkage brass bushings - 06/02/16 06:00 AM
Anyone know where I can get my hands on some of these? Mine are slightly worn and I'd like to replace them. Searches so far have lead me nowhere.
Posted By: 71birdJ68
Re: 70 E body wiper linkage brass bushings - 06/02/16 01:27 PM
Those had a special machine process and are not just a plain bushing, at least that is what Jules told me. And I don't know who is doing that now.
Posted By: VCODE
Re: 70 E body wiper linkage brass bushings - 06/02/16 01:38 PM
Bill at BME in NJ
He has a Banner on here
Bob
Posted By: ACR2000
Re: 70 E body wiper linkage brass bushings - 06/02/16 07:02 PM
Anyone know where I can get my hands on some of these? Mine are slightly worn and I'd like to replace them. Searches so far have lead me nowhere.
I had some made also as I replace them when I restore wiper linkages
Posted By: VCODE
Re: 70 E body wiper linkage brass bushings - 06/02/16 07:08 PM
Stephan, that's good to know
Thanks Bob
Posted By: Aar1064
Re: 70 E body wiper linkage brass bushings - 06/03/16 02:51 AM
I'll check with Bill.
Appreciate it.
Posted By: bmcuda
Re: 70 E body wiper linkage brass bushings - 06/06/16 02:40 AM
Yes I have some of these made, they are a snug hand fit & as factory did them they have a 2nd taper, was created with a special taper press tool as that is how they are secured from factory.So when installed have a straight center bore & an inside & outside taper. also need to be special brass so when expanded will not crack. I install them. had special tools made.