Posted By: 65 Belv A990
1970 Plymouth B-body interior questions. Danger long winded - 03/28/16 04:15 PM
I have a few questions for the 1970 Roadrunner crowd regarding a black bucket seat interior.I’ve tried a couple of other forums but have not had any responses, so I thought I would try here. My wife ordered a complete Legendary interior at the Indy swap meet a couple of weeks ago for her 70 RR that she bought last year and we are restoring. Without thinking about it much, we went with what was on the seats that were in it assuming they were original, which appear to be all black with the thin silver piping. This was done before I realized the fender tag is coded for a P6XA interior which is supposed to be charcoal and black bucket seats. I just found out from the guy we bought it from after we ordered the upholstery that the rear seat cover is original but the front seats were recovered decades ago, as we got this low mileage bird from the original owner. The front seats sure look all black to me but the rear seat is so faded it’s hard to tell what it should be but it also has the silver piping. If you go by the fender tag/ broadcast sheet however, they should be if I remember correctly, black in the Ranger Grain center insert area with the remainder of the seat with the Coachman Grain should be a dark charcoal color. She prefers the all black seats with the thin silver piping,so that’s what she went with at the time. The car is FK5 with a V1X black vinyl top and TX9 upper inner door paint so all black would look better and made sense. On the other hand, my wife also wants the car restored assembly line correct as tagged except for the stock looking stroker Hemi I’m building for it to possibly run in the F.A.S.T class with the help of a friend Dave Dudek. We would like it to be an extremly correct (within budget) looking clone of one of the 59 RM23 Hemi 4-speeds that were built. Now this is bugging me and I’m wondering if all black bucket seats were ever available from the factory on a 1970 Plymouth B-body as I have never owned one and if so, could this car just another Lynch Rd mistake? I have always been a 68-69 RR guy and until now, paid little attention to 1970 trim codes. The original owner who is a longtime friend of mine is not much help as he gutted the car in the 70’s to race and we have to put just about everything back in it. The heater box, wipers and linkage, window regulators and glass, air grabber system and much of the dashboard had been removed and stored in boxes. He even cut out the inner metal out of the passenger side door shell and the rear inner quarter area that I have to weld back in to reinstall the window regulators. The door and rear seat trim panels were long gone and covered in gorilla fur in the mid 70’s and he does not remember any more if they were black or not. IMO,it is one thing to change an interior color to something that was available to suit personal taste, but I’m having a hard time moving forward with something that may have never existed from the factory at all, as I am too much of a purist to do that. The wife has told me to go ahead and change the order with Legendary if need be to restore the interior correctly as tagged. Has anyone ever run into a survivor 1970 Plymouth Roadrunner/GTX/Superbird with an all black interior or a P6XA tagged car that had all black seats with silver piping from the factory before? I’ve seen plenty of 70 Plymouth B-bodies over the years with all black seats with the black piping and the silver piping as well as the charcoal and black with both color piping and Legendary carry all 4 options. The factory trim book does not show an all black interior at all, but that is no guarantee there never was one. Were there also options on the piping/welt color when these cars were new and if so how this was coded on the order, or is this too just an aftermarket thing? I’m wondering now if just like the 1970 Cuda white hockey stripes that were never available from the factory, is this just another case of aftermarket creative artistry that has gone on for so long that it’s an excepted norm by many not in the know and has become urban legend? If all black seats with a silver piping were in fact available from the factory what should the fender tag code be besides P6XA? I’m thinking it would be something like P6X9 which was an option in 71.
Can somebody post some good bright high resolution pictures of a 1970 P6XA interior including door panels and front/rear seat to compare with what is currently our car. I’m pretty convinced the seats need to be changed to the charcoal and black but I need to determine what color the door panels, armrests,kick panels,visors, the hard plastic front seat backs, rear package tray and the buddy seat should be on a P6XA interior black or charcoal? I’m assuming as the trim book indicates with the notation that the carpet, headliner, dash, steering column and wheel should be black is this correct? If the car had a S81 simulated wood grain steering wheel I would also assume the center horn button should also be black.
Also I just found a decent C21 Buddy Seat for the car that was missing when we bought it. The seat was in excellent condition with nice foam and the critical tunnel mounting brackets to weld back in. Another thing about this Buddy Seat when we ordered the new covers from Legendary is they asked if we wanted it with the map pocket or without. I ordered it also in black, but now as indicated above that may need to be charcoal too. I’m a little in the dark on this one as I have never had a Buddy Seat Mopar before and never really paid attention. I have yet to find anything in my archives on the subject of this map pocket. The previous owner took the original out 40 years ago and does not remember if it had a map pocket or not and there are no option codes to verify if it did or not. This seat is actually a 69 piece that I think came out of a Coronet but I’m pretty sure it’s the same as a 70 B-body seat. It has a little pocket towards the back of the seat bottom near where the pivot ears come out of the bottom cover which I’m assuming is this map pocket they are talking about is that correct? Could a Roadrunner have this pocket or is this an upscale GTX, Coronet R/T -500, Charger S/E thing? If this map pocket was an option, what is and where do you find the code for it? I actually think it would look better without it, but I have to make a decision soon and get back to Legendary with my decision. Also should the buddy seat have silver welts if the seats do? I know it’s a lot of questions as this is the first ever 1970 in our stable and would appreciate if anyone has a definitive insight on this?
Can somebody post some good bright high resolution pictures of a 1970 P6XA interior including door panels and front/rear seat to compare with what is currently our car. I’m pretty convinced the seats need to be changed to the charcoal and black but I need to determine what color the door panels, armrests,kick panels,visors, the hard plastic front seat backs, rear package tray and the buddy seat should be on a P6XA interior black or charcoal? I’m assuming as the trim book indicates with the notation that the carpet, headliner, dash, steering column and wheel should be black is this correct? If the car had a S81 simulated wood grain steering wheel I would also assume the center horn button should also be black.
Also I just found a decent C21 Buddy Seat for the car that was missing when we bought it. The seat was in excellent condition with nice foam and the critical tunnel mounting brackets to weld back in. Another thing about this Buddy Seat when we ordered the new covers from Legendary is they asked if we wanted it with the map pocket or without. I ordered it also in black, but now as indicated above that may need to be charcoal too. I’m a little in the dark on this one as I have never had a Buddy Seat Mopar before and never really paid attention. I have yet to find anything in my archives on the subject of this map pocket. The previous owner took the original out 40 years ago and does not remember if it had a map pocket or not and there are no option codes to verify if it did or not. This seat is actually a 69 piece that I think came out of a Coronet but I’m pretty sure it’s the same as a 70 B-body seat. It has a little pocket towards the back of the seat bottom near where the pivot ears come out of the bottom cover which I’m assuming is this map pocket they are talking about is that correct? Could a Roadrunner have this pocket or is this an upscale GTX, Coronet R/T -500, Charger S/E thing? If this map pocket was an option, what is and where do you find the code for it? I actually think it would look better without it, but I have to make a decision soon and get back to Legendary with my decision. Also should the buddy seat have silver welts if the seats do? I know it’s a lot of questions as this is the first ever 1970 in our stable and would appreciate if anyone has a definitive insight on this?