Posted By: vette1986
Holley Dual feed fuel line OEM look?? - 02/24/16 08:36 PM
I am putting a 4150 holley on my charger and want the "OE" look of fuel lines not the chrome ones that seem to be the only ones I can find. Anyone know a duel feed fuel line for a holley 4150 that has a factory look? I would assume there are some out there but I can't seem to find them. Thanks
Posted By: Ply72rr
Re: Holley Dual feed fuel line OEM look?? - 02/25/16 01:35 AM
There was a company called Fabulous Fabrications (303-666-9882) that use to sell them but I don't know if they are still in business. If you have a double flare tool you can make them yourself pretty easily.
Posted By: OzHemi
Re: Holley Dual feed fuel line OEM look?? - 02/25/16 02:33 AM
Posted By: Moparnut426
Re: Holley Dual feed fuel line OEM look?? - 02/25/16 03:43 AM
I tried making a set of lines but my bender kept kinking the tube, and I only had a T fitting, but I can see if I can buy a fitting like this one and fab something up for it.
Mike, I even thought about cutting and brazing something together but I think that might not be as easy.
Kasey
Posted By: 70BigBlockSE
Re: Holley Dual feed fuel line OEM look?? - 02/25/16 02:43 PM
I used the Camaro fitting and bent my own. Pretty happy with it. The fitting comes in either 3/8 in and out or 3/8 input and 5/16 outs
Posted By: vette1986
Re: Holley Dual feed fuel line OEM look?? - 02/25/16 02:58 PM
We need a 3/8 fitting. Where did you get yours? I think Kasey can bend up the tubing if we can get the fitting. Thanks
Posted By: 70BigBlockSE
Re: Holley Dual feed fuel line OEM look?? - 02/25/16 03:12 PM
Right Stuff Detailing PN RSBB06 'Y' Block, 3/8 x 3/8 x 3/8 from Jegs or Summit, a little over $20
Posted By: RoadRunner
Re: Holley Dual feed fuel line OEM look?? - 02/25/16 04:42 PM
I had a partial 6bbl fuel line kit laying around. I used the line from the pump to the first T, and the s shaped tube to the front inlet. I bought a straight line from NAPA and bent it to get to the rear fitting.