Posted By: cudascooter
Clutch safety switch repair - 02/01/15 01:47 AM
Hi, Does anyone know the best way to repair the clutch switch wire for my 70 Cuda? I have attached a pic. Thanks
Posted By: Slotts
Re: Clutch safety switch repair - 02/01/15 02:40 AM
I restore these 2947858 clutch switches by making the tubular copper rivets to re-attach the ground panel and eyelet. On this JSR thread, if you scroll down to the June 19, 2013 post, shows one going through a restoration.
https://board.moparts.org/ubbthreads/show...e=0&fpart=2Jim
Posted By: JohnRR
Re: Clutch safety switch repair - 02/01/15 02:41 AM
take it apart , drill out the crimped rivet , new connector on the wire and either a new rivet or a small screw and locknut ??