Gluing Polyproplene (dash plastic parts)

Anone ever use this stuff to glue/repair dash plastic pieces
" 3M™ Scotch-Weld™ High Performance Industrial Plastic Adhesive 4693H "

Ad says: "exhibits excellent bond strength to metals and many plastics, including polypropylene, polyethylene and high-impact polystyrene"

Ref: http://www.shop3m.com/3m-scotch-weld-hig...-5-oz-tube.html

Isn't one of those the plastic used that is hard to repair in our old mopars?
Jess

I would like to know about this too.

Ok, apparently that stuff is no longer availale, but JB Weld is offering this stuff that supposed to work with polypropylene & polyethylene plastics. Any experience with this stuff?
jess

What are you trying to glue, most parts are abs or pvc, not polypropylene.

The two parts that surround the heater controls (left of steering column) and radio bezel (right of steering column).
jess

Get a compatible epoxy and have at it...

What kind of plastic on the newer seat trim ?