Posted By: 68gtx
fuel pump? - 11/19/13 10:16 PM
68 440 fuel pump? I have a carter M4845 the inlet is 3/8 outlet is 5/16th. The question is did the factory use an adapter for the line out to the separator?? I have not found a pump with an outlet that will allow the outlet line to connect directly to the pump?? Thanks larry J
Posted By: 68gtx
Re: fuel pump? - 11/19/13 10:32 PM
Thanks for the picture. My ? is on your outlet at the fuel pump do you have an adapter between fuel pump outlet and the line to the separator?? So pump adapter line. Or does your line connect directly to your pump? Thanks Larry J
Posted By: Mr D21
Re: fuel pump? - 11/19/13 10:35 PM
adapter ? - there is a hard steel line that bolts to the pump (as shown in the picture) and then a rubber fuel line from the steel line to the separator (again shown in the picture).
Posted By: 68gtx
Re: fuel pump? - 11/19/13 10:52 PM
So my metal line out from the pump to the separator should screw right on to the pump without any adapters. The airtex 901 and the carter M4845 both will need an adapter to allow the metal line to connect to the pump. Is the another pump that will allow me to screw the line directly to the pump? Thanks Larry J
Posted By: jlatessa
Re: fuel pump? - 11/19/13 10:54 PM
On some pumps there is a square fitting on the bottom, a pipe thread reducer with a flare is into that, then the 5/16 hard line.
Joe
Posted By: Mr D21
Re: fuel pump? - 11/19/13 11:01 PM
The 2nd picture I posted is a correct pump with the correct outlet already part of the pump.
Posted By: LO23
Re: fuel pump? - 11/20/13 12:34 AM
yes there is an adapter. i just bought the same pump. it needs a female inverted adapter.
Posted By: 68gtx
Re: fuel pump? - 11/20/13 12:58 AM
I think the issue I am having is the repop line is 3/8s. and not 5/16ths can I assume the original line outlet is 5/16ths. Thanks Larry J
Posted By: LO23
Re: fuel pump? - 11/20/13 01:09 AM
this is the pump you want-hes moparts member. the napa pump has a male receiver, needing the adapter. and yes the line would have been 5/16.
http://www.ebay.com/itm/Mopar-Hemi-440-F...#ht_1767wt_1124
Posted By: Mr D21
Re: fuel pump? - 11/20/13 01:18 AM
he has the wrong fuel line - I think that's the issue...
Posted By: FJ5_Fish
Re: fuel pump? - 11/20/13 04:01 PM
Here is the piece you need. Y-One has them...probably others as well.
Posted By: 68gtx
Re: fuel pump? - 11/20/13 04:34 PM
Did the factory use the adapter?? Or did the line connect directly to the fuel pump without and adapter?? Either I have the wrong line or the wrong pump or the factory used the adapter and all of my parts are correct?? I have a Carter M4845. And reproduction lines which the line that connects directly to the fuel pump outlet is 3/8 is it suppose to be 5/16ths?? Thanks Larry J
Posted By: 68gtx
Re: fuel pump? - 11/20/13 04:52 PM
I realize i can use an adapter. The real ? for me is did the factory use an adapter??? Thanks larry j
Posted By: burdar
Re: fuel pump? - 11/20/13 05:00 PM
By looking at the first picture, the inlet uses KV- hose which is 3/8". The hose connected to the outlet line is just KV. That is 5/16". It looks to me like the outlet line is 5/16". I think you have the wrong line.
Posted By: Mr D21
Re: fuel pump? - 11/20/13 05:19 PM
Larry - you have either the wrong pump or the wrong fuel line. Either way, there is NO adapter from the factory.
Sounds like in your case an adapter will be an easy and quick fix if you don't care about factory correctness...
Posted By: 68gtx
Re: fuel pump? - 11/20/13 05:30 PM
I was just trying to find out if they used an adapter or not from the factory. Not trying to make it 100% but close. Thanks larry J
Posted By: 68gtx
Re: fuel pump? - 11/20/13 08:23 PM
Thanks Just so many different opinions on this subject. I wasn't sure if i needed the adapter. It makes since to me that if they used M4845 you need an adapter. Thanks AgainLJ!!!!!!!
Posted By: 68gtx
Re: fuel pump? - 11/21/13 10:51 PM
1 adapter coming up!!!!!!!!Thanks lj