E-body Rallye Dash Fastener Kit?

Does anyone know if anyone has ever put together (and/or sells) a "fastener kit" that attaches EVERYTHING that mounts onto a E-body dash frame (more specifically Rallye dash)? This would include ALL screws, j-nuts, u-nuts, etc. I have seen (and have purchased some) ALL kinds of fastener kits for other E-body applications (i.e. interior screw kit, exterior screw kit, under-hood fastener set, etc, etc). Thanks.

Most of the stuff I needed was in the interior screw kit. It did not have the end bolts but that is all that I can remember it did not have.
It had hardware for both the standard cluster and the rallye dash (not sure there are a lot of differences but I did have extra stuff when done). I bought it years ago off of ebay before I discovered this board and the quality providers advertising here.

Quote:

---

Most of the stuff I needed was in the interior screw kit. It did not have the end bolts but that is all that I can remember it did not have.
It had hardware for both the standard cluster and the rallye dash (not sure there are a lot of differences but I did have extra stuff when done). I bought it years ago off of ebay before I discovered this board and the quality providers advertising here.

---

Thanks. I do have an interior screw kit for '70-'71 E-body convertible, but I have not checked it out recently to see what's there for the dash. I'll check it out, and see what I find. I'm sure though that not EVERYTHING needed will be there (with regard to the dash).