Posted By: jsorensen
Proportioning Valve - 02/10/13 05:24 AM
Does anyone know of someone that rebuilds / restores proportioning valves?
Posted By: MikeyT
Re: Proportioning Valve - 02/10/13 06:02 AM
inline tubes sells rstored or brand new ones. Here is the link.
http://www.inlinetube.com/
Posted By: Anonymous
Re: Proportioning Valve - 02/10/13 07:48 AM
The two In Line Tube hold off / proportioning valves both failed on me a short time after I installed in on my charger. The replacement they sent me was defective right out of the box! They said to send it back and they would check it out which then said there was nothing wrong with it and sent it back only to still have the same problem with it. I located an original one and have had zero problems since!
Posted By: jsorensen
Re: Proportioning Valve - 02/10/13 05:20 PM
Inline tube told me they no longer sell the Challenger valves and they are trying to find a new supplier due to problems. So I will check with Jules.
A local member sells kits with seals to re=build yours or get the new ones from Fine Lines as they have the most correct looking ones.
Posted By: steve70
Re: Proportioning Valve - 02/11/13 12:32 PM