Pic of 1969 Hemi distributor please

Anyone have a pic of a 69 Hemi original distributor please ? I am looking at a dual point with vac advance, no tag, not sure where the cap clips should be in relation to the vac advance ? Also how exactly should it be pointed when in the engine, with the vac advance pointing up to the driver side ? Thanks for your help

1969' hemi prestolite dual point

Installed... []

Without a tag it could be anything , first off look at the base that goes into the engine , it should have an o-ring groove , if it doesn't its a 67 or earlier distributor.

How it is lined up in the engine all depends on where you put the wire for cylinder #1 , the distributor itself doesn't know or care as line as the firing order is right and #1 is set at/near the top of the #1 cylinder compression stroke.

Quote:

---

Anyone have a pic of a 69 Hemi original distributor please ? I am looking at a dual point with vac advance, no tag, not sure where the cap clips should be in relation to the vac advance ? Also how exactly should it be pointed when in the engine, with the vac advance pointing up to the driver side ? Thanks for your help

---

One on right is original 69 Hemi 4spd.