Posted By: NicksGarage
Question: original '70 'Cuda front valance hardware - 11/18/08 12:19 AM
Does anyone have an original 1970 'Cuda front valance with its ORIGINAL trim hardware still in place? I need to know what 3 bolts/nuts were used as well as what 2 screws.nuts on the topside.
Photos would be great.
Thanks
Posted By: m46rat
Re: Question: original '70 'Cuda front valance hardware - 11/20/08 03:43 AM
I have the silver zinc screws and plastic retainers NOS, but the two speed nuts are impossible to find new. I have a couple only.
Posted By: HEMICUDA
Re: Question: original '70 'Cuda front valance hardware - 11/20/08 06:09 AM
Here's the correct bolt that holds the valance insert in on a 70. It has the "ELH" on the head, 3/4" catured washer. I took this off my 3,900 mile survivor for a photo for a friend 2 days ago.
Posted By: gtx6970
Re: Question: original '70 'Cuda front valance hardware - 11/20/08 11:51 AM
are these a 3/8" hex on a #10-24 machine thread bolt with what style point?
Posted By: m46rat
Re: Question: original '70 'Cuda front valance hardware - 11/20/08 12:36 PM
Snoopy: Do you have an engineering drawing showing the front valence and attaching hardware for a 70 or 71 Barracuda? I believe I have it at home, I will check tonight. If you have it please post, I do not believe it will show the bolt pictured.
Posted By: Snoopy
Re: Question: original '70 'Cuda front valance hardware - 11/20/08 08:42 PM
Just so everyone is on the same page, are we talking about the lower steel valance or the plastic valance insert?
I think we are talking about the steel lower valance, but I could be wrong.
Posted By: FC7cuda
Re: Question: original '70 'Cuda front valance hardware - 07/11/21 05:16 PM
Dwight,
Do you have the Engineers drawing to post? I took apart and original and I'm seeing the outer screws as 10/24 x 1" Oval Head Philips. Not the thread cuttings pan head that you're showing in your pic.
Thanks
Ton
