Posted By: gassy66
Source for key blanks with Pentastar on them?? - 10/04/12 02:15 PM
Hoped to find key blanks at Mopar Dealers Parts Dept., but was disappointed. Where to find???
Quote:
Went to Key & Lock Store that's been around since 1916- They had Mopar blanks,and cut Keys for ign.
and trunk- blank didn't have proper "A" on It, but had a "B" instead. But only cost Me 8 bucks
and a penny,total..I'm happy. Thanks for all Yer input..
Quote:
Yale was a suppler before Briggs (now Strattec).
there are different locations of milled groves in the length of the key, making them A or B.
They used different warting (bump in the lock cylinder that follows the milled groove) in the locks to increase the number of possible combinations.
Yale also used different heights of the bumps, making the pin sets different than most newer ones.
Quote:Quote:
Yale was a suppler before Briggs (now Strattec).
there are different locations of milled groves in the length of the key, making them A or B.
They used different warting (bump in the lock cylinder that follows the milled groove) in the locks to increase the number of possible combinations.
Yale also used different heights of the bumps, making the pin sets different than most newer ones.
Thank you.