Posted By: Meangreen68
1968 Charger tail lamp and vinyl top belt mouldings - 08/11/12 10:21 PM
Was the stainless steel trim used on the rear of a '68 Charger chrome plated?
I concerned mainly with the vinyl top belt mouldings which butts to the pot-metal "check" trim
...and the longer stainless trim mouldings for the trunk lid and the lower tail lamp panel.
I recall years ago buffing mine and I swore I broke-through a layer which appeared to be a plating of sorts.
Thanks,
John
I concerned mainly with the vinyl top belt mouldings which butts to the pot-metal "check" trim
...and the longer stainless trim mouldings for the trunk lid and the lower tail lamp panel.
I recall years ago buffing mine and I swore I broke-through a layer which appeared to be a plating of sorts.
Thanks,
John