vinyl top and windshield trim

Hey gang..
I was wondering if there's a technique that's used to reduce the "Bump" of the vinyl top seam. I'm putting on the windshield trim and have notice that the upper corner is being difficult due to the vinyl trim... Do you "help" thin out the seam so there isn't so much of an obstruction to the curve of the trim. Everything else seems to be perfect on all the other parts of the moulding top and bottom.

Thanks..

I took a hammer and blunt punch to mine to pound it just a little flatter--made a difference.

You can trim the top layer away too. Just make sure you do it low enough so you don't see it.

Thanks guys.. Did exactly that and it worked.... Now, does anyone know if there's a screw kit that includes the proper fasteners for the bottom windshield trim plate?

Quote:

---

Thanks guys.. Did exactly that and it worked.... Now, does anyone know if there's a screw kit that includes the proper fasteners for the bottom windshield trim plate?

---

http://www.ebay.com/itm/230402429515?item=230402429515&viewitem=&vxp=mtr