Moparts
Pressure plate hot spots
Posted By:
cudacam
Pressure plate hot spots -
09/27/11
02:00 AM
My SPEC stage 2 clutch didn't get seated properly and this is the result. Is this pp ok to run with a new disc and re-surfaced flywheel?
Posted By:
Challenger 1
Re: Pressure plate hot spots -
09/27/11
02:03 AM
No it needs to be surfaced too.
Posted By:
cudacam
Re: Pressure plate hot spots -
09/27/11
03:40 AM
Should I try to resurface or just get a new plate with the disc? I didn't know how much you could take off the plate and not affect the pressure.
Thanks
Posted By:
Challenger 1
Re: Pressure plate hot spots -
09/27/11
12:00 PM
Talk to Brewers, they will know. Some pressure plates can be resurfaced with a flywheel grinder.
Posted By:
MLR426
Re: Pressure plate hot spots -
09/27/11
03:09 PM
Get a new plate.
logan426
© 2024
Moparts Forums