Moparts

70 Charge Moog front suspension part numbers

Posted By: moparmojo

70 Charge Moog front suspension part numbers - 05/07/11 11:45 PM

By chance does anyone happen to have the Moog part # for the front suspension of a 70 Dodge Charger.I am in need of a total rebuild. I got some Rock Auto gift cards and would like to get this front end finally back together.

Posted By: A12

Re: 70 Charge Moog front suspension part numbers - 05/08/11 12:13 AM

Here's what I have that I used a few years ago:

1965-79 B-Body

'75-'79 Cordoba
'79 300 Dodge
'65-'76 Coronet
'66-'78 Charger
'69-'71 Super Bee
'77-'78 Monaco
'78-'79 Magnum Plymouth
'65-'70 Belvedere
'65-'74 Satellite
'67-'74 GTX
'68-'75 Road Runner
'75-'78 Fury


Upper Ball Joint Year Model Part Number

1965-79 All K772


Lower Ball Joint and Steering Arm Year Model Part Number (Right) Part Number (Left)

1965-72 All K781 K783
1973-79 All K7069* K7069*

* If original ball joint has four wrench flats, it is a threaded type and must be replaced by K719 threaded ball joint.


Upper Control Arm Kit Year Description Part Number

1965-72 Cam Bolt Kit (less bushings) K8243A
1965-72 Bushing Kit K408
1973-79 Shaft Kit K7105
1973-79 Bushing Kit K7058


Lower Arm Bushing Kit Year Model Part Number

1965-72 All K791 (2 kits required per car)
1973-79 All K7059 (2 kits required per car)


Strut Rod Bushing Kits Year Model Part Number

1965 All K7039
1966-72 All K7026
1973-74 exc/ Police & Taxi (to 10-19-73) K7068
1973-74 exc/ Police & Taxi (from 10-20-73) K7085
1973-74 Police & Taxi K7026
1973-79 All K7085


Idler Arm & Pitman Arm Kits Year Model Idler Arm Pitman Arm

1965-67 All K779 N/A
1968-70 All K7041 N/A
1971-72 All K7041 N/A
1973-76 All w/manual steering K7066 N/A
1973-76 All w/power steering K7066 K7076
1977-79 All K7066 K7076
Posted By: Joesixpack

Re: 70 Charge Moog front suspension part numbers - 05/08/11 12:15 AM

I have the special tool to change the upper control arm bushings if you want to borrow it.
Posted By: Lifsgrt

Re: 70 Charge Moog front suspension part numbers - 05/12/11 06:44 AM

Suggest you use the offset upper control arm bushings during your rebuild. Installed correctly, they'll bring your steering much closer to todays standards, and when you exit a turn, the steering wheel will self-center much more than with non-offset bushings.
Posted By: Stanton

Re: 70 Charge Moog front suspension part numbers - 05/12/11 01:51 PM

All those Moog p/n's will be listed on Rockauto under the make and model of your car !!!
Posted By: moparmojo

Re: 70 Charge Moog front suspension part numbers - 05/13/11 02:07 AM

Thanks everyone!
© 2024 Moparts Forums