Moparts

overspray removal

Posted By: can.al

overspray removal - 04/06/11 03:48 AM

..i have a small amount of over spray on my rear window trim ('70 Duster)
what the best way to remove it..i think it's stainless and will take the trim off first.
will a product like paint stripper harm stainless steel?
Posted By: barracudabob

Re: overspray removal - 04/06/11 03:51 AM

Try a clay bar. I've done several vehicles that had overspray. It worked well, but was a lot of effort(complete vehicle).
Posted By: zrwhat

Re: overspray removal - 04/06/11 03:56 AM

Quote:

..i have a small amount of over spray on my rear window trim ('70 Duster)
what the best way to remove it..i think it's stainless and will take the trim off first.
will a product like paint stripper harm stainless steel?




And old painter's trick is using bronze wool on glass and trim to remove overspray, the bronzewool is very soft and will not scratch glass or chrome, I keep some around just for that reason.

Best place to find it is in a marine supply store or boat supply store, go with the finest grade you can, triple 0 or quad 0000 works best,
Good luck
Posted By: keith airgrabber

Re: overspray removal - 04/06/11 04:25 AM

laquer thinner is what you need. Or steel wool fine.
Posted By: elitecustombody

Re: overspray removal - 04/06/11 05:13 AM

Lacquer thinner
Posted By: jrlegacy23

Re: overspray removal - 04/06/11 03:15 PM

Try WD40 on a rag.
© 2024 Moparts Forums