Assembly/break in Oil with lotsa Zinc??

Am now assembling My 440,would anyone be able to tell Me which Engine oil readily available has the
most Zinc rich formula to use during assembly ( I
will be dipping My Pistons in It,soaking My new Lifters in It),and during initial run in ??

Do a search on this site, topic is posted almost weekly.

I tried search,got no results.Didn't want to waste
valuable time when I could be getting Grease under My fingernails searching thru thousands of
freaking pages on this forum,when somebody who
knows could post answer,and I could go to Store!

https://board.moparts.org/ubbthreads/show...e=1#Post6495431

try this post

Use shell rotella and add the comp cams break-in additive...That'll give you what you need for the initial fire-up...

http://www.compcams.com/Products/CC-%27Lubricants%27-0.aspx

What about this?

Use Joe Gibbs BR Break In Oil. You have lots of $$ in the engine, don't skimp on the oil at break in.

Joe Gibbs Break in Oil or Brad Penn break in oil. Both have the amount of zink needed for a proper break in

Brad Penn is what I used to break in my engine. FWIW I read recently it's not a good idea to soak lifters. I think it was in Mopar Action a few months back.