Posted By: JonC
Vibrations re re re re revisited - 12/12/10 11:50 PM
Again in my never ending quest to eliminate a vibration in my 72 cuda I think I caught some conversation on here about tranny locating dowels that may be the cause. I am actually missing one on the passenger side of my engine. After thinking about this I'm sure it could be a cause. Where do I get one and am I right assuming this? I've got all winter to put one in.
Posted By: Sinitro
Re: Vibrations re re re re revisited - 12/13/10 12:03 AM
Check this out..
http://www.brewersperformance.com/products.asp?cat=225&pg=2Talk to Wayne @ Brewers
Brewer's Performance
2560 S. State Rt. 48
Ludlow Falls, OH 45339
PH: 937-698-4259
Wayne is very knowledgible for Mopars, besides being a nice guy..
Just my $0.02...
Posted By: DaytonaTurbo
Re: Vibrations re re re re revisited - 12/13/10 05:51 AM
Does it vibrate with the throttle application and at a stop or only while moving? A transmission dowel is a possibility but then it will vibrate at a stop in park or neutral as well as at speed. You have verified you're running the correctly weighted(or non-weighted) torq converter/flywheel and balancer for your crankshaft?