Posted By: hemirag
hemi carbs - 10/04/10 02:26 AM
Anyone know what size jets and metering rods came from the factory in carter street hemi carbs?
Thanks Daryl
hemismitty@sbcglobal.net
Posted By: B5 Bee
Re: hemi carbs - 10/04/10 04:02 AM
'69 carbs
jets-
front .089 pri .089 sec
rear .089 pri .092 sec
rods-
front 16-82x
rear 16-543L 16-544R
low speed-
front #65-.028
rear #65-.028manual #65-.031automatic
Posted By: gers1968rt
Re: hemi carbs - 10/04/10 11:02 PM
68 carbs: front carb
primary jets .089 with 16-341 rod(I think this rod is .068 by .061)
secondary jets .080
rear carb auto and manual trans:
primary jets .089 with 16-543 left side and 16-544 right side ( I believe these rods are .069 by .054 left, and .071 by .058 right)
secondary jets .092 left and .077 right
the only difference in the auto to manual carbs are the low speed jet (primary): auto #65-.031
manual #65-.028
Posted By: pacifica
Re: hemi carbs - 10/12/10 03:12 AM
Anyone know why the changes were made from 68' to 69' carbs? [as far as jetting]
Posted By: srt
Re: hemi carbs - 10/12/10 04:51 AM
I'm going to guess here-> early emmissions control