Posted By: Mr.Yuck
shop rate (how much) - 09/06/10 04:50 PM
Can somebody tell me what a shope rate would be to swap out a brake booster on a 00' Jeep GC? Looks like a not so hard fix.
shop rate (how much)
Posted By: not_a_charger
Re: shop rate (how much) - 09/06/10 07:04 PM
According to Mitchell Ultramate, it pays .7 hours, which includes the labor for the master cylinder.
Posted By: Commando1
Re: shop rate (how much) - 09/06/10 07:06 PM
Shop Rate:
Dealer $95.00/hr.
Independant: $65/hr.
Jose's Garage: $30/hr.
Friend: NOT worth it.
Yourself: Priceless.
You need to know how many hrs. Chiltons says it requires.
Or were you asking for that in the first place?
Dealer $95.00/hr.
Independant: $65/hr.
Jose's Garage: $30/hr.
Friend: NOT worth it.
Yourself: Priceless.
You need to know how many hrs. Chiltons says it requires.
Or were you asking for that in the first place?
Posted By: formula_s
Re: shop rate (how much) - 09/06/10 07:09 PM
Quote:
According to Mitchell Ultramate, it pays .7 hours, which includes the labor for the master cylinder.
What guide do Chrysler dealers use? Mitchell? All Data? Identifix?
Posted By: chache876
Re: shop rate (how much) - 09/06/10 07:18 PM
Quote:Quote:
According to Mitchell Ultramate, it pays .7 hours, which includes the labor for the master cylinder.
What guide do Chrysler dealers use? Mitchell? All Data? Identifix?
Dealerships usually have their own rates set by the manufacturer. Typically they're less than what AllData or Mitchell would list
Posted By: EASY
Re: shop rate (how much) - 09/06/10 08:17 PM
I love your reply to the hour rates. I'm old and been the route on this. All so true. 
Posted By: Mr.Yuck
Re: shop rate (how much) - 09/06/10 08:44 PM
Quote:
According to Mitchell Ultramate, it pays .7 hours, which includes the labor for the master cylinder.
WOW dude quoted me 2 hours at $87/hr. So I swaped it myself. If he told me .7 I would have let them do it.
Posted By: Fab64
Re: shop rate (how much) - 09/06/10 08:48 PM
So, how long did it take you?
Posted By: LimeliteAero
Re: shop rate (how much) - 09/06/10 11:11 PM
Quote:Quote:
According to Mitchell Ultramate, it pays .7 hours, which includes the labor for the master cylinder.
WOW dude quoted me 2 hours at $87/hr. So I swaped it myself. If he told me .7 I would have let them do it.
he really didnt want to do it, but if you agreed to his rate he would have.
Posted By: Mr.Yuck
Re: shop rate (how much) - 09/07/10 12:22 AM
Quote:
So, how long did it take you?
about hour and 45 minutes.
Posted By: MoparforLife
Re: shop rate (how much) - 09/07/10 12:29 AM
Quote:
Dealerships usually have their own rates set by the manufacturer. Typically they're less than what AllData or Mitchell would list
Unless they have changed in recent times, the only time the dealer uses the Chrysler flat rates is for warranty work. The rest of the the time they use Chilton or Mitchell time because they allow more time than the Chrysler flat rate.
Posted By: WILD BILL
Re: shop rate (how much) - 09/07/10 12:34 AM
AllData is showing 1.5 hrs to R&R the booster.
Posted By: 1969gtx
Re: shop rate (how much) - 09/07/10 01:33 AM
mitch 1.5 to r&r plus diag
Posted By: deansrr
Re: shop rate (how much) - 09/08/10 02:30 AM
Quote:
Shop Rate:
Dealer $95.00/hr. our area $120
Independant: $65/hr. $83
Jose's Garage: $30/hr. $50
Friend: NOT worth it. totally agree
Yourself: Priceless. if you an do it right!