Radiator hose 64/65 b-body Big Block 22" radiator

Hi,
I purchased the lower radiator hose (passenger side radiator). I got the Gates 20923, seems like it should fit. Its 1 3/4" and 1 1/2".

The upper I couldnt get (here in Sweden....). Anyone know the part # on Gates? Its 22" radiator, inlet passenger side. Its big block and straigt thermostat house.

The old hose looks like this.

Thanks!

Ill have to look at my 65 and see what the number is.I got mine and one for the kids 62 300 at Advanced Auto.Rocky

Didya try a search?? I found these numbers a couple(??) of years ago... Car is long gone, the numbers are supposedly for a 440/correct big block radiator(64 B body)... Napa 7201 upper/7370 lower... Can take a pic of them if that would help.. Bill

The Gates 20355 worked perfectly for my big block 64 Dodge with the stock radiator.

Thanks guys,
Nice engine compartment. Did some more search and ended up with the gates 20355 to. great to see that it works in the real life to.

I will buy the clamps also. I need tree 1 1/2 and one 1 3/4 or? I have the stock radiator and water pump housing.

Thanks!

Quote:

---

Thanks guys,
Nice engine compartment. Did some more search and ended up with the gates 20355 to. great to see that it works in the real life to.

I will buy the clamps also. I need tree 1 1/2 and one 1 3/4 or? I have the stock radiator and water pump housing.

Thanks!

---

Thanks. I do not know the measurements of the clamps. You can buy a complete set including heater hoses which is what I did.
Brewer's Hose Clamp Kit