Posted By: AAR70
MP elektronic Distributor - 07/29/10 06:37 PM
Hi,Does someone know how much total mekanical advance the MP distributor have ?
MP elektronic Distributor
Posted By: 540challenger
Re: MP elektronic Distributor - 07/29/10 07:04 PM
Quote:Not sure about your question.
Hi,Do someone know total mekanic (Not vacuum) advance on the MP elektronic distributor there fit small block?
Do you mean how to adjust the mech advance or how to tell how much is in the distributor ??
Posted By: AAR70
Re: MP elektronic Distributor - 07/29/10 07:23 PM
how much is the MP distributors total mekanical advance out the box? 22 24 26 28 degree?
Posted By: cuda-sweden
Re: MP elektronic Distributor - 07/30/10 03:31 PM
hej,messed with mine bought in 97 the other day.its got 27 degrees mech advance.as a bonus i can tell you that the vacuum can can be adjusted between 6-17"inches of jadajada,it is between those nr of hg"vacuum it starts to add the extra advance.dont know if my vacuum meter is accurate but the mech advance ive checked with 3 timing lights and if i remember right they where pretty close to each other,my 25 year old BILTEMA 
timing light red the same as my also old back-dial snap-on. 
this is off off a bb mp distributor.
Posted By: JohnRR
Re: MP elektronic Distributor - 07/30/10 05:30 PM
Quote:
how much is the MP distributors total mekanical advance out the box? 22 24 26 28 degree?
How old is this distributor ? Newer units have an adjustable mechanical advance , old units to have to weld the slots .